Dell Virtual Storage Integrator (VSI) for VMware vSphere Client Version 10.0 Product Guide

View Unity Storage System Details

Use the procedure in this topic to view the details of Unity storage system.

1. Log in to VMware vSphere Client.
2. Click Menu > Dell VSI.
3. Click Storage Systems on the left side.
   The Storage Systems page is displayed and it displays all the registered storage systems.
4. Select the Unity storage system that you want to view and click the storage name.
   The Details tab displays the following information:

   • Name
   • Model
   • Serial Number
   • Software Version
   • IP Address
   • Managed by
   • VASA Provider

   It also displays Storage System Capacity and VSI usable Capacity of the Unity storage system.

5. Click Storage Pools tab, it displays all the registered storage pools that are accessible to the VSI plug-in.
   NOTE You can add storage pools by clicking + icon and you can also delete the storage pools by clicking X icon from the Storage Pools tab.
6. Click NAS Servers tab, it displays all the registered NAS servers that are accessible to the VSI plug-in.
   NOTE You can add NAS Servers by clicking + icon and you can also delete the NAS Servers by clicking X icon from the NAS Servers tab.
7. Click Capability Profile tab, it displays the registered capability profiles for a Unity storage system.
   NOTE The owners of the Unity storage system can register or unregister capability profiles.
8. Click Certificates tab, it displays the certificates imported for Unity storage system.
9. Click Hosts tab, it displays the Esxi hosts on the current logged in vcenter that are registered with Unity Storage system.