Use the procedure in this section to register
Unity storage system to the VSI plug-in.
Prerequisites
You cannot add Storage Pools, Capability Profiles, and NAS Servers without registering
Unity storage array.
Non-admin user who has host level privileges can also register storage systems to the plug-in.
Steps
Log in to the VMware vSphere Client.
Click
Menu > Dell VSI.
Click
Storage Systems on the left side.
The
Storage Systems page is displayed.
To register the
Unity storage system, click
+ (add) icon.
The
Register Storage System wizard is displayed.
To register the
Unity storage system, follow the on-screen step-by-step process.
In the
Type and Connection Settings step, enter the values for following parameters:
Storage System Type: Select
Unity storage system from the drop-down list.
Unisphere Host Name/IP
NOTE Host name and IP address both are supported.
Unisphere Username
Unisphere Password
Once all the values are specified, the
NEXT button is enabled. Click
NEXT.
In the
Import Certificates step, you can import the certificates if the storage system or vCenter uses third party or intermediate certificate.
NOTE The
Import Certificates step is optional, you can click
NEXT to proceed without importing certificates.
In the
Storage Pools step, select the storage pools that you want to register and click
NEXT.
NOTE
You can select multiple storage pools by selecting the check boxes.
Storage pool selection can be also done post the storage system registration.
In the
NAS Servers step, select the NAS Servers that you want to register and click
NEXT.
NOTE
You can select multiple NAS servers by selecting the check boxes.
NAS server selection can be also done post the storage system registration.
In the
Capability Profiles step, select the capability profiles to be accessible to VSI and click
NEXT.
NOTE The capability profiles cannot be created in VSI, they must be created from Unisphere.
In the
Storage Access step, select the users or groups from the list of all the vCenter users and groups are displayed. Click
NEXT. The selected users or groups are granted access to the
Unity Storage Pools, Capability Profiles, and NAS Servers.
NOTE
The
Storage Access tab is enabled only if you select a Storage Pool, Capability Profile, or NAS Server. This tab is not displayed in the wizard if you do not select any Storage Pool, Capability Profile, or a NAS Server.
You can select multiple users or groups by selecting the check boxes.
In the
VASA Provider step, select the checkbox to register VASA provider in vCenters and click
NEXT.
NOTE The
VASA Provider step is not visible if it is already registered.
In the
Hosts step, select the hosts to be registered to the Unity and click NEXT.
NOTE The
Hosts step is not visible if all hosts have been registered in Unity.
In the
Ready to Register step, review the settings and click
FINISH.
Results
The
Unity storage system is registered and displayed on the
Storage Systems page.
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\