Use the procedure in this topic to register a
PowerFlex storage system to the VSI plug-in.
Steps
Log in to the VMware vSphere Client.
Click
Menu > Dell VSI.
Click
Storage Systems on the left side.
The
Storage Systems page is displayed.
On the
Storage Systems page, click
+ (add) icon.
The
Register Storage System wizard is displayed.
To register the
PowerFlex storage system, follow the on-screen step-by-step process:
In the
Type and Connection Settings step, select or enter the values for following parameters:
Storage System Type
PowerFlex Gateway Name/IP
Port
Username
Password
Once all the values are specified, the
NEXT button is enabled. Click
NEXT.
In the
Import Certficates step, you can choose to register
PowerFlex with or without SSL.
NOTE This is an optional step.
If you wish to register
PowerFlex without using SSL, click
NEXT.
If you wish to register
PowerFlex using SSL, you must import the certificate. Click
IMPORT and click
Enable SSL: PowerFlex toggle. Click
NEXT.
In the
Storage Pools step, select the storage pool from the list and click
NEXT.
In the
Storage Access step, you can choose to add more users or user groups to access the
PowerFlex storage system.
NOTE This is an optional step.
If you wish to proceed without adding more users or user groups, click
NEXT.
If you wish to add more users or user groups to access the
PowerFlex storage system, select the users from the list displayed to grant them permissions and click
NEXT.
In the
Ready to Register step, review your selections and click
FINISH.
You can click
BACK to make any changes.
Results
The
PowerFlex storage system is now registered to VSI plug-in and displayed on the
Storage Systems page.
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\