Vostro 3710 Service Manual

Screw list

NOTE:When removing screws from a component, it is recommended to note the screw type, and the quantity of screws, and then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is restored when the component is replaced.

NOTE:Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surfaces when replacing a component.

NOTE:Screw color may vary with the configuration ordered.

Table 1. Screw listScrew list
Component	Secured to	Screw type	Quantity	Screw image
Left-side cover	Chassis	#6-32	2
2230 solid-state drive	System board	M2x3.5	1
2280 solid-state drive	System board	M2x3.5	1
Wireless card	System board	M2x4	1
3.5-inch hard drive	Chassis	#6-32, pan head	4
Power-supply unit	Chassis	#6-32, hex head	3
Optical drive (optical)	Chassis	M2x2	2
Media-card reader (optical)	Chassis	M3x5	2
Front I/O-bracket	Chassis	#6-32, pan head	2
Processor fan and heat-sink assembly	System board	Captive (M3)	4
System board	Chassis	#6-32, hex head	8
System board	Chassis	#6-32x3.8	1