Dell Vostro15–3565 Owner's Manual

Installing the system board

1. Connect power cable and eDP cable.
2. Replace the white adhesive tape.
3. Turn the system board over.
4. Align the system board with the screw holders on the computer.
5. Tighten the screws to secure the system board to the computer.
6. Close the hinge and tighten the screws to secure the system board to the computer.
7. Turn the computer over and open the computer and connect the optical drive cable and the touch pad cable to the system board.
8. Install the:
   1. WLAN card
   2. I/O board connector
   3. memory module
   4. heat sink
   5. coin cell battery
   6. base cover
   7. optical drive
   8. keyboard
   9. battery
9. Follow the procedure in After working inside your computer.