Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell Vostro 15–3568 Owner's Manual

Installing the system board

  1. Connect the power cable cable.
  2. Affix the adhesive tape.
  3. Flip the system board.
  4. Align the system board with the screw holders on the computer.
  5. Tighten the two M2L3 screws to secure the system board to the computer.
  6. Tighten the display hinge screw to the computer.
  7. Connect the following cables to the system board.
    1. hard drive connector
    2. touchpad connector
    3. speaker connector
    4. I/O connector
    5. eDP connector
    6. power connector
  8. Install the:
    1. system fan
    2. heat sink
    3. memory module
    4. WLAN Card
    5. base cover
    6. keyboard
    7. optical drive
    8. battery
  9. Follow the procedure in After working inside your computer.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\