Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell Vostro 15 – 3549 Owner's Manual

Removing the Display Assembly

  1. Follow the procedures in Before Working Inside Your Computer.
  2. Remove:
    1. Battery
    2. optical disk-drive
    3. access panel
    4. hard drive
    5. memory module
    6. keyboard
    7. palmrest assembly
    8. system board
  3. Unroute the WLAN cable and remove the screws that secure the display panel to the chassis.
    Figure displaying removing screws securing display panel to chassis.
  4. Place the display panel on a stable surface and lift the bezel from the computer.
    Figure displaying prying the display bezel off the display panel.
  5. Remove the screws that secure the display hinges to the display assembly. Then, lift and remove the display hinges away from the display assembly.
    Figure displaying removal of display hinges.
  6. Remove the screws securing the display panel to the display assembly. Then, flip the display panel to access the cables underneath.
    Figure displaying exposure of underlying cables.
  7. Perform the following steps as shown in the illustration:
    1. Lift the eDP cable from the computer [1].
    2. Disconnect the eDP cable.
    3. Remove the display panel from the computer [3].
    Figure displaying disconnection of eDP cables.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\