Place the hard drive in the hard drive bracket and align the screw holes on the hard-drive bracket with the screw holes on the hard drive [1].
Replace the 4 (M3x3) screws to secure the hard drive bracket to the hard drive [2].
Connect the interposer to the hard drive assembly.
Place the hard drive assembly on the system and align the screw holes on the hard-drive assembly with the screw holes on the palm-rest and keyboard assembly [1].
Replace the 4 (M2x3) screws to secure the hard drive assembly to the palmrest and keyboard assembly [2].
Connect the hard drive assembly cable to the connector on the system board and close the latch to secure the cable [3].