Dell Vostro 5481 Service Manual

Installing the display assembly

1. Slide and align the palmrest and keyboard assembly at an angle under the hinges on the display assembly.
   
2. Place and align the screw holes on the display hinges with the screw holes on the palm-rest and keyboard assembly [1].
3. Replace the four (M2.5x5) screws to secure the display hinges to the palmrest and keyboard assembly [2].
4. Reroute the WLAN antenna cable through the routing channel [3].
   
5. Connect the display cable to the connector on the system board and close the display cable connector latch [1].
6. Affix the adhesive tape to secure the display cable to the display cable connector [2].
7. Connect the IO board cable to the connector on the IO board and close the IO board connector latch [3].
8. Affix the adhesive tape to secure the IO board connector [4].
   
9. Install the:
   1. WLAN
   2. system fan
   3. battery
   4. base cover
10. Follow the procedure in After working inside your computer.