- Notes, cautions, and warnings
- Working on your computer
- Removing and installing components
- Technology and components
- System specifications
- System setup
- Software
- Troubleshooting
- Contacting Dell
Option | Description |
---|---|
Admin Password | Allows you to set, change, or delete the administrator(admin) password. The entries to set password are:
Click OK once you set the password. NOTE For the first time login, "Enter the old password:" field is marked to "Not set". Hence, password has to be set for the first time you login and then you can change or delete the password. |
System Password | Allows you to set, change, or delete the System password. The entries to set password are:
Click OK once you set the password. NOTE For the first time login, "Enter the old password:" field is marked to "Not set". Hence, password has to be set for the first time you login and then you can change or delete the password. |
The entries to set password are: NOTE For the first time login, "Enter the old password:" field is marked to "Not set". Hence, password has to be set for the first time you login and then you can change or delete the password. | |
M.2 SATA SSD Password | Allows you to set, change, or delete the password on the system's M.2 SATA solid state drive. The entries to set password are:
Click OK once you set the password. NOTE For the first time login, "Enter the old password:" field is marked to "Not set". Hence, password has to be set for the first time you login and then you can change or delete the password. |
Strong Password | Allows you to enforce the option to always set strong password.
This option is not set by default. |
Password Configuration | You can define the length of your password. Min = 4, Max = 32 |
Password Bypass | Allows you to bypass the System password and the Internal HDD password, when it is set, during a system restart. Click one of the options:
|
Password Change | Allows you to change the System password when the administrator password is set.
This option is set by default. |
Non-Admin Setup Changes | Allows you to determine whether changes to the setup options are allowed when an Administrator Password is set. If disabled the setup options are locked by the admin password.
This option is not set by default. |
UEFI Capsule Firmware Updates | Allows you to update the system BIOS via UEFI capsule update packages.
This option is set by default. |
TPM 2.0 Security | Allows you to enable or disable the Trusted Platform Module (TPM) during POST. The options are:
Click any one of the following:
|
Computrace (R) | Allows you to activate or disable the optional Computrace software. The options are:
|
CPU XD Support | Allows you to enable the Execute Disable mode of the processor.
This option is set by default. |
Admin Setup Lockout | Allows you to prevent users from entering Setup when an administrator password is set.
This option is not set by default. |
Master Password Lockout | Allows you to disable master password support.
This option is not set by default. NOTE Hard Disk password should be cleared before the settings can be changed. |