- Notes, cautions, and warnings
- Preface
- Introduction
- Access Control
- Access control settings
- Security for management access
- Authentication
- Authorization
- Component access controls
- Data security settings
- Password policy
- Physical security controls
- Login banner and message of the day
- Logging
- Communication Security
- Communication security settings
- Port usage
- Ports used by Unisphere components on VNX for block
- How VNX for file works on the network
- Network encryption
- Management support for TLS communications on VNX2 systems
- SSL certificates
- Planning considerations for Public Key Infrastructure on VNX for file
- IP packet reflect on VNX for file systems
- Effect of filtering management network
- vSphere Storage API for Storage Awareness (VASA) support
- Special configurations
- Secure Remote Procedure Call
- Other security considerations
- Data Security Settings
- Data at Rest Encryption overview
- Data at Rest Encryption feature activation
- Encryption status
- Backup keystore file
- Data in place upgrade
- Hot spare operations
- Adding a disk drive to a VNX with encryption activated
- Removing a disk drive from a VNX with encryption enabled
- Replacing a chassis and SPs from a VNX with encryption enabled
- Security Maintenance
- Advanced Management Capabilities
- Secure deployment and usage settings
- TLS cipher suites
- LDAP-based directory server configuration
- VNX for file CLI role-based access
- VNX for file CLI security configuration operations
- Configuring password policy
- Configuring session timeout
- Protect session tokens
- Configuring network encryption and authentication using the SSL protocol
- Configuring PKI
- Creating the certificate provided by the persona
- Using the Control Station as the CA
- Obtaining CA certificates
- Generate a key set and certificate request
- Send the certificate request to the CA
- Import a CA-signed certificate
- List the available CA certificates
- Acquire a CA certificate
- Import a CA certificate
- Generate a new Control Station CA certificate
- Display the certificate
- Distribute the Control Station CA certificate
- Request and Install Customer-Supplied Certificates for Control Station
- Managing PKI
- Customize a login banner
- Create a MOTD
- Restrict anonymous root login
- Locking accounts after a specific number of failed logins
- VNX for block SSL certificate import
EMC® VNX® Series Security Configuration Guide for VNX
Generate a new Control Station CA certificate
About this task
NOTE: This task is required only if the CA key set has been compromised or the CA certificate expires. The initial Control Station CA certificate is generated during a VNX for file software installation or upgrade.
You must be the root user to issue this command.
Steps
To generate a new key set and certificate for the Control Station, type:
# /nas/sbin/nas_ca_certificate -generate
NOTE: By default, this certificate is valid for 5 years from the date it is generated and the certificate’s name is the Control Station’s hostname.
Output:
New keys and certificate were successfully generated. Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\