- Notes, cautions, and warnings
- Preface
- Introduction
- Access Control
- Access control settings
- Security for management access
- Authentication
- Authorization
- Component access controls
- Data security settings
- Password policy
- Physical security controls
- Login banner and message of the day
- Logging
- Communication Security
- Communication security settings
- Port usage
- Ports used by Unisphere components on VNX for block
- How VNX for file works on the network
- Network encryption
- Management support for TLS communications on VNX2 systems
- SSL certificates
- Planning considerations for Public Key Infrastructure on VNX for file
- IP packet reflect on VNX for file systems
- Effect of filtering management network
- vSphere Storage API for Storage Awareness (VASA) support
- Special configurations
- Secure Remote Procedure Call
- Other security considerations
- Data Security Settings
- Data at Rest Encryption overview
- Data at Rest Encryption feature activation
- Encryption status
- Backup keystore file
- Data in place upgrade
- Hot spare operations
- Adding a disk drive to a VNX with encryption activated
- Removing a disk drive from a VNX with encryption enabled
- Replacing a chassis and SPs from a VNX with encryption enabled
- Security Maintenance
- Advanced Management Capabilities
- Secure deployment and usage settings
- TLS cipher suites
- LDAP-based directory server configuration
- VNX for file CLI role-based access
- VNX for file CLI security configuration operations
- Configuring password policy
- Configuring session timeout
- Protect session tokens
- Configuring network encryption and authentication using the SSL protocol
- Configuring PKI
- Creating the certificate provided by the persona
- Using the Control Station as the CA
- Obtaining CA certificates
- Generate a key set and certificate request
- Send the certificate request to the CA
- Import a CA-signed certificate
- List the available CA certificates
- Acquire a CA certificate
- Import a CA certificate
- Generate a new Control Station CA certificate
- Display the certificate
- Distribute the Control Station CA certificate
- Request and Install Customer-Supplied Certificates for Control Station
- Managing PKI
- Customize a login banner
- Create a MOTD
- Restrict anonymous root login
- Locking accounts after a specific number of failed logins
- VNX for block SSL certificate import
EMC® VNX® Series Security Configuration Guide for VNX
VNX for file primary network services
At the highest level, VNX for file provides NFS, CIFS, and FTP or TFTP file access services to end users. These are the final services provided and generally, the reason why VNX for file exists in the network environment. To some extent, all other network activity related to VNX for file is ancillary to this functionality; the additional network services exist to support these high-level services.
VNX for file Data Mover network ports and VNX for file Control Station network ports outline the collection of network services (and the corresponding ports) that may be found on VNX for file. VNX for file Data Mover network ports addresses the services on a Data Mover, and VNX for file Control Station network ports addresses the services on a Control Station.
NOTE: Not all VNX for file deployments have all
these services available. For example, a VNX for file system may be configured
to provide either CIFS or NFS file services. It is also worth noting that some
of the ports are dynamically allocated, meaning that there is no set port
number associated with the service. In these cases, an administrator may notice
that a different port is used rather than the ones specified in these tables.
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\