- Notes, cautions, and warnings
- Additional resources
- Business case
- Solution overview
- Key results / recommendations
- Introduction
- Serviceability commands
- Dump ACL database (svc_acldb_dump)
- Array configuration (svc_arrayconfig)
- Apply custom log-on banners (svc_banner)
- Boot control (svc_boot_control)
- Cache (svc_cache)
- Antivirus configuration (svc_cava)
- Configure backup and recovery (svc_cbr)
- Change hardware configuration (svc_change_hw_config)
- Check hardware configuration (svc_check_hw_config)
- CIFS support (svc_cifssupport)
- Configure ConnectEMC (svc_connectemc)
- Copy data in vault drives (svc_copyto)
- Upload SSL certificates (svc_custom_cert)
- Dynamic Access Control (svc_dac)
- Data protection operations (svc_dataprotection)
- Data collection (svc_dc)
- System diagnostics (svc_diag)
- ELMS usage information (svc_elms)
- ESRS Virtual Edition (svc_esrs_ve)
- Event Publishing diagnostics (svc_event_publishing)
- Firewall (svc_firewall)
- Help (svc_help)
- Modify data import sessions (svc_imt)
- Initial configuration (svc_initial_config)
- Inject troubleshooting software tool (svc_inject)
- Base Management Controller interface (svc_ipmi)
- Restore KMIP Server configuration (svc_kmip)
- View locks (svc_lockd)
- Mapped RAID (svc_mapped_raid)
- Mount storage (svc_mount)
- Advanced NAS settings (svc_nas)
- Create management interface (svc_network)
- Network configuration information (svc_networkcheck)
- Network Bond options for FSN and LACP connections (svc_network_bond)
- Dump NFS clients (svc_nfssupport)
- Synchronize time (svc_ntp)
- Operating system information (svc_oscheck)
- NAS server backup and restore statistics (svc_pax)
- Collect performance information (svc_perfcheck)
- Purge logs (svc_purge_logs)
- Restore Unity OE (svc_reimage)
- Reinitialize Unity to factory settings (svc_reinit)
- Service Mode information (svc_rescue_state)
- Management stack controls (svc_restart_service)
- Map a Linux block device to a VMware hard disk (svc_scsi_id)
- Service user password configuration (svc_service_password)
- Service shell (svc_service_shell)
- Shutdown (svc_shutdown)
- Enable Secure Shell (svc_ssh)
- STIG (svc_stig)
- Run FSCK on storage (svc_storage_integritycheck)
- Output storage information (svc_storagecheck)
- SupportAssist (svc_supportassist)
- Collect Tie-breaker Node trace information (svc_tbn_dc)
- Configure Tie-breaker Node network (svc_tbn_network)
- Change Tie-breaker Node password (svc_tbn_password)
- Shutdown Tie-breaker Node VM (svc_tbn_shutdown)
- Redirect output (svc_tcpdump)
- Display Real-time File Statistics (svc_topstats)
- UDoctor utility (svc_udoctor)
- Dump VHDX metadata (svc_vhdx)
- View services (svc_view_services)
- Virtual platform host check (svc_vp_hostcheck)
- Appendix A
- Appendix B
Dell Unity™ Family Service Commands Technical Notes
Run FSCK on storage (svc_storage_integritycheck)
This service script runs File System Check (FSCK) on storage file systems and returns them to a mountable state.
- Function: Recovery
- Mode: Normal
- Usage: Technical Service
Description
This command automatically unmounts file systems that are in use, runs FSCK on them, and then remounts the file systems when it is safe to do so.
Executing this command is the fastest way to remount a file system.
A file system only appears as an output if it is corrupt and unmounted. The command gives an option to fix and remount corrupted and unmounted file systems.
Use cases
Usage:
svc_storage_integritycheck [-h | --help]
Options:
- [-h | --help]
- Display help and exit.
Related commands
None.
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\