Dell Unity™ Family Unisphere® Command Line Interface User Guide

PDF

View initiators

View a list of initiators. You can filter on the initiator ID, host ID, or whether the initiator is registered.

Format

/remote/initiator [{-id <value> | -host <value> | -unregistered}] show

Object qualifier

Qualifier	Description
-id	Identifies the initiator.
-host	Type the ID of a host configuration to view the initiators assigned to the host configuration.
-unregistered	Specifies unregistered initiators.

Example

The following command lists the details of all initiators on the system:

uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /remote/initiator show

Storage system address: 10.0.0.1
Storage system port: 443
HTTPS connection

1: ID                  = HostInitiator_7 
   Host                = Host_4
   UID                 = iqn.1991-05.com.microsoft:cnenfanw4l1c.corp.emc.com
   Initiator type      = iscsi
   Ports logged in     = spb_eth2,spa_eth2 
   Ignored             = no
   Health State        = OK (5)
   Health Details      = "The component is operating normally. No action is required."
   CHAP users          =
   Source type         = Open_Native
   Failover mode       = ALUA
   LUNZ                = yes
   Unit serial number  = Array