Dell Unity™ Family Unisphere® Command Line Interface User Guide

PDF

View Ethernet port settings

View details about the network ports. You can filter on the port ID.

NOTE:The show action command explains how to change the output format.

Format

/net/port/eth [-id <value>] show

Object qualifier

Qualifier	Description
-id	Type the ID of the port.

Example

uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /net/port/eth show -detail

Storage system address: 10.0.0.1
Storage system port: 443
HTTPS connection

1:    ID                      = spa_eth2
      Name                    = SP A Ethernet Port 2
      SP                      = spa
      Protocols               = file, net, iscsi
      MTU size                = 4500
      Requested MTU size      = 4500
      Available MTU sizes     = 1280-9216
      Linux device name       = eth2
      Speed                   = 1 Gbps
      Requested speed         = auto
      Available speeds        = 1 Gbps, 10 Gbps, 100 Mbps, auto
      Health state            = OK (5)
      Health details          = "The port is operating normally."
      Aggregated port ID      = None
      FSN port ID             = None
      Connector type          = RJ45
      MAC address             = 00:60:16:7A:7F:CF
      SFP supported speeds    =
      SFP supported protocols =

2:    ID                      = spa_eth3
      Name                    = SP A Ethernet Port 3
      SP                      = spa
      Protocols               = file, net, iscsi
      MTU size                = 1500
      Requested MTU size      = 1500
      Available MTU sizes     = 1500, 9000
      Linux device name       = eth3
      Speed                   = 1 Gbps
      Requested speed         = auto
      Available speeds        = 1 Gbps, 10 Gbps, 100 Mbps, auto
      Health state            = OK (5)
      Health details          = "The port is operating normally."
      Aggregated port ID      = None
      FSN port ID             = None
      Connector type          = RJ45
      MAC address             = 00:60:16:7A:7F:CE
      SFP supported speeds    =
      SFP supported protocols =