Dell Unity™ Family Unisphere® Command Line Interface User Guide

PDF

Prepare system software version

Prepare an automatically downloaded software image for installation.

NOTE:Support will not push down any software images to your system without prior user consent.

Format

/sys/soft/ver -id <value> prepare

Object qualifier

Qualifier	Description
-id	Type the ID of the automatically downloaded system software.

Example 1

The following command prepares automatically downloaded software image "ASD_1" for installation:

uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /sys/soft/ver -id ASD_1 prepare

Storage system address: 10.0.0.1
Storage system port: 443
HTTPS connection

Operation completed successfully.

Example 2

The following command shows the error that is returned when trying to prepare an image that was not an automatically downloaded software candidate:

uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /sys/soft/ver -id CAND_1 prepare

Operation failed. Error code: 0x6000cd5
The specified image ID is invalid. The current action can only be performed on downloaded images. Obtain the image ID with '/sys/soft/ver -type downloaded show' and try again with correct image ID. (Error Code:0x6000cd5)

NOTE:Use the /sys/soft/ver show command to obtain the ID of any automatically downloaded software images on the system. The "Type" should be "downloaded" such as in the following example:

      ID              = ASD_1
      Type            = downloaded
      Version         = 4.2.0.9215195
      Release date    = 
      Image type      = software
      Reboot required =
      Pause allowed   =
      Image filename  = Unity-_dev_001-upgrade-4.2.0.9215195.9215195-4.2.0.9215195.9215195-GNOSIS_DEBUG.tgz.bin.gpg