Dell Unity™ Family Unisphere® Command Line Interface User Guide

PDF

Manage Data at Rest Encryption (physical deployments only)

NOTE:This feature may not be available in your implementation.

Table 1. Data at Rest Encryption attributes
Attribute	Description
Encryption mode	Encryption mode. Valid values are: Unencrypted Controller Based Encryption
Encryption status	Status of the encryption process. Valid values are: Not encrypting In progress Encrypted Scrubbing NOTE:This attribute is not applicable, and is blank, when the license for the feature is not installed.
Percent encrypted	Percent of user data encrypted.
Backup keystore status	Status of the keystore backup. Valid values are: No operation required Keystore is inaccessible Backup keystore operation required Backup keystore operation in progress Backup keystore operation complete The keystore must be backed up, using the uemcli -download command, and stored off the storage system. NOTE:This attribute is not applicable, and is blank, when the license for the feature is not installed.
KMIP status	Status of KMIP support. Valid values are: Enabled—KMIP feature is enabled. Disabled—KMIP feature is disabled. Unsupported—KMIP feature is not supported. Unknown—KMIP feature status cannot be determined. NOTE:Once enabled, allows the storage system to interact with external key management servers that are KMIP compliant for key management associated with Data at Rest Encryption.
SED status	Self encrypting drive status. Locking Enabled—Self encrypting drive is activated. Locking Disabled—Self encrypting drive is not activated. Unsupported—Self encrypting drive is not supported by the storage system. NOTE:Once enabled, this option allows the storage system to interact with external key management servers that are KMIP compliant for key management associated with Data at Rest Encryption.