Dell Unity™ Family Unisphere® Command Line Interface User Guide

PDF

Change tie breaker node configuration settings

Modify the Tie Breaker Node (TBN) configuration.

Format

/net/tbn/config set [-enabled {yes|no}] [-activeTbn <value>]

Action qualifier


Qualifier	Description
-enabled	Enable or disable a TBN. Valid values are: yes no
-activeTbn	Specify the TBN identifier: Use this value with the -enabled qualifier to enable the specified TBN. Use this value without the -enabled qualifier to activate the specified TBN. The TBN identifier is not needed when the value of the -enabled qualifier is no.

Example 1: Enable a TBN

uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /net/tbn/config set -enabled yes -activeTbn 42389FCA-01D1-4491-7D77-8060373D67B8

Storage system address: 10.64.75.201
Storage system port: 443
HTTPS connection

Operation completed successfully.

Example 2: Disable a TBN

uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /net/tbn/config set -enabled noStorage system address: 10.64.75.201 Storage system port: 443 HTTPS connection Operation completed successfully

Example 3: Change the active TBN

uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /net/tbn/config set -activeTbn 42389FCA-01D1-4491-7D77-8060373D67B8

Storage system address: 10.64.75.201
Storage system port: 443
HTTPS connection

Operation completed successfully