Unisphere and Unisphere Central 2020 R1 Administrator's Guide

Deploy the Storage Center

The Initialize Storage Center wizard performs system deployment tasks.

1. (SC9000 only) To add a second controller to the storage system:
   1. Select the Add Second Controller check box.
   2. Type the hardware serial number of the second controller in the New Controller HSN field.
   3. Type the IPv4 adddress for the management port on the second controller in the Eth0 IPv4 Address field.
   4. Type the IPv4 address for the Eth1 port on the second controller in the Eth1 IPv4 Address field.
   5. Type IPv6 address for the management port on the second controller in the Eth0 IPv6 Address field.
   6. Type the IPv6 subnet prefix for the management port on the second controller in the Eth0 IPv6 Prefix field.
   7. Click Start Deployment.
2. Wait until all of the Storage Center deployment tasks are complete.
3. Click Next.