Unisphere and Unisphere Central 2020 R1 Administrator's Guide

Assign a Threshold Definition to a Storage Object or Storage Center

Select the storage object and then click the Set Threshold Alert Definitions to assign a threshold definition.

1. If you are connected to a Data Collector, select a Storage Center from the drop-down list in the left navigation pane of Unisphere Central.
2. To assign a threshold definition to the Storage Center, select Thresholds from the MONITORING menu and skip the next step.
3. Select the storage object to which to assign a threshold definition from the following views in the STORAGE menu:
   • Volumes – Click the name of the volume to which to assign the threshold definition, and click the Thresholds tab.
   • Servers – Click the name of the server to which to assign the threshold definition, and click the Thresholds tab.
   • Storage Profiles – Click the Profiles view, click the Storage Profiles tab, select the storage profile to which to assign the threshold definition, and click the Thresholds tab.
   • Disks – Select the disk to which to assign the threshold definition, and click the Thresholds tab.
4. Click Set Thresholds.
   The Set Threshold Definitions dialog box opens.
5. In the top pane, select the alert definition to which to assign a threshold definition.
6. In the bottom pane, select the threshold definition to assign to the alert definition.
7. Click Set Thresholds.
   The selected threshold definition is assigned to the alert definition.

   NOTE To unassign a threshold definition from the selected alert definition, select the assigned threshold definition in the Available Alert Definitions pane and click Clear Definition.
8. Click OK.