Unisphere and Unisphere Central 2020 R1 Administrator's Guide

Assign a Threshold Definition to a Controller

Select a controller and then click the Set Threshold Alert Definitions to assign a threshold definition.

1. If you are connected to a Data Collector, select a Storage Center from the drop-down list in the left navigation pane of Unisphere Central.
2. From the SYSTEM menu, click Hardware.
   The Hardware view is displayed.
3. Select the controller to which to assign a threshold definition.
4. Click Set Thresholds.
   The Set Threshold Definitions dialog box opens.
5. Select the alert definition to which to assign a threshold definition.

   The threshold definitions that appear in the Available Alert Definitions pane depend on the type of alert definition selected.

6. From the Available Alert Definitions pane, select the threshold definition to assign to the alert definition.
   If a threshold definition for the selected alert definition does not exist, create a threshold definition by clicking New Threshold Definition
7. Click Set Thresholds.
   The selected threshold definition is assigned to the alert definition.

   NOTE To unassign a threshold definition from the selected alert definition, select the assigned threshold definition in the Available Alert Definitions pane and click Clear Definition.
8. Click Close.