SCv2080 Storage System Owner’s Manual

Start Up the Storage Controller

If the storage controller was previously shut down, perform this procedure to start it up.

1. Plug the power cables into the PSUs of the storage system.
2. Turn on the storage system by pressing the power switches on the PSUs.
   NOTE When the storage system is powered on, a one-minute delay occurs while the SCv2080 prepares to boot. During this time, the only indication that the SCv2080 is powered on are the LEDs on the storage controllers. After the one-minute delay, the SCv2080 fans and LEDs turn on to indicate that the storage system is starting to come up.
3. Use the Dell Storage Manager Client to make sure that the replacement part is recognized and shown as up and running.