SCv2080 Storage System Owner’s Manual

SCv2080 Storage System Front-Panel Features and Indicators

The front panel of the SCv2080 contains power and status indicators, drawer-specific indicators, and a unit ID display.

In addition, the hard drives are installed and removed from the drawers on the front of the storage system chassis.

Features and indicators on the front of the SCv2080 storage system

Item	Name	Panel	Description
1	Drawer-specific anti-tamper locks		Locks the drawer shut using a Torx T20 screwdriver until the red arrows point to the locked icon (away from the center of the chassis).
2	Drawer-specific left and right side status indicators		Sideplane OK/Power Good Off — Sideplane card or cable fault Green — Sideplane card and cable are functional (though a fault may be indicated by one or more of the following LEDs)
			Drawer Fault Amber — Sideplane card fault or drive failure causing loss of availability or redundancy
			Logical Fault Amber (steady) — Host indicated drive fault Amber (flashing) — Arrays in impacted state
			Cable Fault Amber — Cable fault
3	Drawer-specific left and right side storage system activity indicators		Activity Bar Graph — Six variable-intensity LEDs dynamically displaying access of the drives in that specific drawer
4	Status indicator for storage system		Unit ID Display — Numerical display primarily used to display the unit identification number Input Switch — Not used Power On/Standby Off — Storage system does not have power Green — Storage system is on (operational) Amber — Storage system is in standby mode (not operational)
			Module Fault Amber — Hardware fault (an LED may be lit on a PSU, drawer, DDIC, fan module, or IO module indicating the part at fault)
			Logical Status Amber — Change of status or fault from something other than the storage system itself (this status is typically associated with a disk drive as indicated by its own fault LED)
			Drawer 1 Fault Amber — Drive, cable, or sideplane fault has occurred in drawer 1
			Drawer 2 Fault Amber — Drive, cable, or sideplane fault has occurred in drawer 2 NOTE Both drawer fault LEDs (and all contained DDIC LEDs) flash when the storage system indicator is set to On in Dell Storage Manager Client.