SCv2080 Storage System Owner’s Manual

Replacing a Cooling Fan Module

Use this procedure to replace a failed cooling fan module.

1. Press the release tab and pull the cooling fan module out of the chassis using the handle.
   CAUTION The fan modules are heavy. To avoid injury, use both hands while removing the module.

   

   1. Cooling fan module
   2. Release tab

2. Rotate the replacement cooling fan module so that the release tab and handle are on the right side.
3. Slide the replacement cooling fan module into the chassis until it is fully seated and the release tab clicks into place.
   NOTE Allow several seconds for the enclosure to recognize the cooling fan module and determine its status. When the cooling fan is functioning properly, the Module OK LED turns green and the Battery and Fan fault LEDs are off. In addition, the cooling fan status indicator turns green in the Dell Storage Manager Client.
4. In the Dell Storage Manager Client, make sure that the replacement cooling fan module is recognized and shown as up and running.