Troubleshooting
PSUs
To troubleshoot power supply units (PSUs):
Steps
- Check the status of the PSU using the Dell
Storage Manager Client.
- Determine the status of the PSU LEDs.
- If the PSU fault indicator is lit, the PSU has failed.
- If the Power OK LED is not lit, check the power cord
and power source into which the power supply is plugged:
- Connect another device to the power source and check
whether the device works.
- Connect the power cord to a different power source.
- Replace the power cord.
- If the AC fault LED is lit, this PSU is not supplying
power, though the other PSU may still be supplying power.
- Reseat the PSU by removing and reinstalling
it.
NOTE Allow several seconds for the storage system to recognize
the PSU and determine its status.
Data is not available for the Topic