SCv2000 and SCv2020 Storage System Owner’s Manual

SCv2000/SCv2020 Storage System Front-Panel Features and Indicators

The front panel of the SCv2000/SCv2020 contains power and status indicators, a system identification button, and a unit ID display.

In addition, the hard drives are installed and removed through the front of the storage system chassis.

Features and indicators on the front panel of the storage system.

Item	Name	Icon	Description
1	Power indicator		Lights when the storage system power is on. Off – No power On steady green – At least one power supply is providing power to the storage system
2	Status indicator		Lights when at least one power supply is supplying power to the storage system. Off – No power On steady blue – Power is on and firmware is running Blinking blue – Storage system is busy booting or updating On steady amber – Hardware detected fault Blinking amber – Software detected fault
3	Identification button		Lights when the storage system identification is enabled. Off – Normal status Blinking blue – Storage system identification enabled
4	Unit ID display	—	Displays the storage system identification number. The default value for a new storage system is 01.
5	Hard drives	—	Can have up to 12 3.5-inch or 24 2.5-inch SAS hard drives.