SCv2000 and SCv2020 Storage System Owner’s Manual

Loading, Please wait

Identify the Failed Hard Drive

To determine which hard drive failed, use the Dell Storage Manager .

Use the Dell Storage Manager to connect to the Storage Center.
Click the Hardware tab.
In the Hardware tab navigation pane, select the Storage Center.
In the Hardware Alerts area, find the hardware alert that identifies the expansion enclosure with the failed hard drive.
Figure 1. Hardware Alert Identifying the Expansion Enclosure with the Failed Hard Drive
In the Hardware tab navigation pane, expand the expansion enclosure identified in the previous step.
Select Disks. The status of each hard drive is displayed in the Disks tab.
Select the failed hard drive. The location of the failed hard drive is displayed in the Disk View tab.
Figure 2. Front View of the Expansion Enclosure Showing the Failed Hard Drive

Thank you for your feedback.

Please provide ratings (1-5 stars).

Please select whether the article was helpful or not.

Comments cannot contain these special characters: <>()\