Dell Solutions Enabler 10.1.0 Installation and Configuration Guide

In the case of Single entry Service Names, use the following syntax:

service_name pairing_method network_protocol server_node_name server_network_address port_number security_level

where:

service_name is the name of the service.

pairing method the hyphen (-) or the Single entry specifies this as a Single entry (legacy method).

network_protocol must be TCPIP.

server_node_name is the name of the server host.

server_network_address is the network address of the server. If this is specified, this value overrides the entry specified in the server_node_name.

port_number is the server port number.

security_level is the type of connection the client is expecting to negotiate. Possible values are SECURE, ANY, and NONSECURE. In addition, you can specify a hyphen (-) to use the platform's default setting. For more information, refer to the EMC VMAX All Flash and VMAX3 Family Security Configuration Guide.

Example

In the following example, three site-specific service names (SYMAPI_SERVER, BACKUP_SERVER and SERVER_IP6) are specified as available by the administrator:

SYMAPI_SERVER -  TCPIP node001 12.345.67.89                            7777 ANY
BACKUP_SERVER -  TCPIP node002 -                                        6666 SECURE
SERVER_IP6    -  TCPIP node003 3FFE:80C0:22C:18:250:88FF:FEAD:F92F      6666 SECURE

 
		
Comment text can be entered by placing a pound sign (#) in the first character space of the comment line.