Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Dell Financial Services Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Dell EMC SmartFabric OS10 User Guide Release 10.5.1

PDF

radius-server host

Configures a RADIUS server and the key used to authenticate the switch on the server.

Syntax
radius-server host {hostname | ip-address} key {0 authentication-key | 9 authentication-key | authentication-key} [auth-port port-number]
Parameters
  • hostname — Enter the host name of the RADIUS server.
  • ip-address — Enter the IPv4 (A.B.C.D) or IPv6 (x:x:x:x::x) address of the RADIUS server.
  • key 0 authentication-key — Enter an authentication key in plain text. A maximum of 42 characters.
  • key 9 authentication-key — Enter an authentication key in encrypted format. A maximum of 128 characters.
  • authentication-key — Enter an authentication in plain text. A maximum of 42 characters. It is not necessary to enter 0 before the key.
  • auth-port port-number — (Optional) Enter the UDP port number used on the server for authentication, from 1 to 65535, default 1812.
Default
Not configured
Command Mode
CONFIGURATION
Usage Information
The authentication key must match the key configured on the RADIUS server. You cannot enter spaces in the key. The show running-configuration output displays both unencrypted and encrypted keys in encrypted format. Configure global settings for the timeout and retransmit attempts allowed on RADIUS servers using the radius-server retransmit and radius-server timeout commands.

Supported on the MX9116n and MX5108n switches in Full Switch mode starting in release 10.4.0E(R3S). Also supported in SmartFabric mode starting in release 10.5.0.1.

The no version of this command removes a RADIUS server configuration.
Example 
OS10(config)# radius-server host 1.5.6.4 key secret1
Supported Releases
10.2.0E or later

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\