Use the following procedure to edit the default fabric settings:
NOTE:Any changes to the default fabric settings reboot all the switches in the network fabric.
Click
Global Settings >
Fabric Settings.
Click
Edit.
Edit the values of the default settings:
Domain ID
Leaf and spine ASN
Fabric BGP subnet and mask
Fabric VTEP subnet and mask
Client control VLAN
Client management VLAN
STP mode between MST and Rapid PVST
mDNS
Click
OK.
The system prompts for confirmation to continue. After you click
OK, all the switches in the network fabric reload to apply the fabric setting changes. The changed settings are applied only after a reboot.
When you edit the domain ID:
The fabric settings, fabric interconnect configuration, and fabric name are changed after a reload.
The interface breakout, networks, server profiles, and uplink configurations and its association are retained after a reload.
You must reconfigure BGP EVPN policy details for the external peer connectivity configurations such as multisite fabric interconnect links, external router, NSX-T based on the changed ASN.
Manually onboard VxRail
To manually onboard the VxRail node onto the fabric:
Click
Global Settings >
Fabric Settings.
Click
Edit.
Select
Disable for mDNS.
Click
Ok.
NOTE:The mDNS setting change does not reload the switches, and the change is applied to the latest selection immediately.
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\