Configure BGP EVPN routes
Use the following procedure to configure a BGP EVPN routing policy:
Create BGP EVPN configuration
-
Click
Network >
Routing Configuration.
-
Click
BGP EVPN Configuration.
-
Click
Create.
-
Enter the following details:
- Policy Name—Enter the BGP EVPN policy name.
- Peer loopback address—Enter the peer loopback IP address.
- Peer ASN—Enter the peer ASN number.
- Hop count—Change the hop count as required. The default value of the hop count is 10.
- (Optional) Description—Enter the description for the policy.
-
Click
Create.
The system displays eBGP peer route creation is successful.
Add BGP EVPN route to switch
-
Select a BGP EVPN route policy from the list.
-
Click
Add Route to Switch.
-
Select the switch to which you want to add the route.
-
Click
Add.
The system displays the route to switch addition success message.
Delete eBGP route from switch
-
Select an eBGP route and click
Delete Route.
-
Click
Delete to remove the route from the switch.
The system displays route policy deletion success message.
Data is not available for the Topic