Inventory and add devices that are managed by system management consoles. See
Adapters.
Configure the device to connect with
secure connect gateway directly. After you configure, the device details are automatically displayed in
secure connect gateway. For more information, see the device-specific documentation.
NOTE:If the SNMP and Redfish listener services are disabled, you cannot add device, device discovery rules or adapters for servers and networking devices.
Some devices can be added from the
secure connect gateway user interface or by configuring them to connect to
secure connect gateway directly. If you add such a device from the
secure connect gateway user interface, only limited capabilities are enabled for the device. For steps to configure the device, see the device-specific documentation.
The following table lists the device types or models by the method in which they can be added in
secure connect gateway.
Table 1. Devices types or models and method of adding devices Devices types or models and method of adding devices
Configure the device to connect to
secure connect gateway
Add device from
secure connect gateway user interface
Configure the device to connect to
secure connect gateway or add device from
secure connect gateway user interface
AppSync
9th generation of PowerEdge servers and later
Avamar
Cloud Array
Atmos
Connectrix
CloudBoost Virtual Appliance
Centera
Data Domain
CloudIQ Collector
Chassis
Disk Library Mainframe (DLm) series 4 and 5
Converged Management Software
Customer Management Station
Elastic Cloud Storage (ECS)
Data Protection Advisor
Data Computing Appliance
Isilon or PowerScale
Data Protection Appliance
Dell Compellent
MetroNode or VPLEX
DataIQ
Dell Technologies Disk Library (EDL)
Switch Brocade
Dell Storage Resource Manager (SRM)
Disk Library (DL3D)
ViPR
Dell InterConnect Fabric
Disk Library Mainframe (DLm) series 3
ViPR Storage Resource Manager
Dell ML3
EqualLogic
VMAX (VMAX, VMAX v3, and VMAX AFA)
DellSvcs-Auth
Fluid File System
XtremeIO
DellSvcs-Automate
HIT Kit/VSM for VMware
-
DellSVcs-Connector
iDRAC
-
DellSvcs-CPMS
Linux virtual machines
-
DellSvcs-Monitor
Networking
-
Enterprise Copy Data Management
PowerVault MD3 and ME4
-
Networker
RecoverPoint
-
ObjectScale
Switch Cisco
-
PowerFlex Appliance
Symmetrix
-
PowerFlex OS
vCenter
-
PowerFlex Rack
VNX
-
PowerMaxV4
VNXe
-
PowerPath
Web Scale
-
PowerPath Management Appliance
-
-
PowerProtect Appliance
-
-
PowerProtect Data Manager
-
-
PowerScale SD
-
-
PowerStore*
-
-
PowerVault ME5
-
-
S5000 series servers
-
-
ScaleIO
-
-
Streaming Data Platform
-
-
UCC
-
-
Unisphere
-
-
Unity
-
-
Unity VSA
-
-
VxRack SDDC
-
-
VxRail
-
-
*After the device is configured, enable remote access to manage the device using
secure connect gateway. You can manage remote access permissions to the device using Policy Manager. For more information about the operations and configuration of Policy Manager, see the
Policy Manager for
Secure Connect Gateway 5.x User's Guide available
on the
Secure Connect Gateway - Virtual Edition documentation page.
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\