Dell PowerFlex 4.5.x Administration Guide

Configuring a destination

Define a location where event and alert data that has been processed by PowerFlex Manager should be sent.

1. Go to Settings > Events and Alerts > Notification Policies.
2. From the Destinations pane, click Add.
   The Create New Destination Protocol window opens.
3. From the Destination Properties window:
   1. Enter the destination name and description.
   2. From the Destination Type menu, select either SNMP V2c, SNMP V3, Syslog, Email (SMTP), or Webhook.
4. Click Next.
   The Protocol Settings window opens.
5. Depending on the destination type, enter the following information:

   Destination type	Protocol settings
   SNMP V2c	Network Name/IP Address Port Community string
   SNMP V3	Network Name/IP Address Port Username Security level: Minimal - no more information required Moderate - MD5 authentication password required Maximum - MD5 authentication and DES privacy passwords required
   Syslog	Network Name/IP Address Port Protocol UDP TCP Facility All Authentication Security and authentication
   Email (SMTP)	Destination name Description Destination Type Server Type: SMTP SMTP over SSL SMTPS SMARTTLS Server IP or FQDN Port Sender address and up to five recipient addresses If you choose to use credentials enter: Username, password, sender address and up to five recipient addresses Send Test Email Test Email Server Connection
   Webhook	Destination name Description Destination Type Select Webhook. You can have up to three webhook destinations. Webhook Destination API URL For example, if you want to configure a webhook destination for BigPanda, you must specify the BigPanda endpoint here. You can get this URL from the BigPanda site. Enable Credentials Credentials For example, for BigPanda, the credential you use must have an App Key and a Token string. You can generate these values on the BigPanda site and then copy them to the App Key and Token fields. Test Webhook

6. Click Finish.