- Notes, cautions, and warnings
- Introduction
- Revision history
- Install
- Installation overview and prerequisites
- Preparing the PowerFlex Manager environment
- Deploying into a VMware vSphere environment
- Management VM resource requirements
- Deploying the PowerFlex management platform
- Deploying and configuring the PowerFlex management platform installer VM
- Deploying and configuring the PowerFlex management platform VMs
- Deploy the PowerFlex management platform cluster
- Finalize firewall configuration
- Collect PowerFlex management platform support data
- Uninstall the PowerFlex management platform cluster
- Deploying into a co-resident management environment on PowerFlex storage
- Deployment workflow
- Co-residency management deployment prerequisites
- Deployment design for co-residency management
- Manually deploying PowerFlex storage
- Creating a three-node MDM cluster
- Install the MDM packages (three-node cluster)
- Generate PowerFlex MDM certificates for three-node MDM cluster
- Create the three-node MDM cluster
- Add a protection domain
- Add a storage pool
- Add storage data servers
- Set the spare capacity for the medium granularity storage pool
- Identify disks
- Add storage devices
- Creating a five-node MDM cluster
- Install the storage data client on a Linux-based server
- Preparing the PowerFlex cluster to host PowerFlex Manager
- Deploying the PowerFlex management platform installer
- Creating a three-node MDM cluster
- Deploying into a Linux management environment
- Deploying into a VMware vSphere environment
- Troubleshooting a PowerFlex management platform deployment
- Configuring PowerFlex Manager
- Deploying PowerFlex storage
- Operating system requirements
- Preparing the storage node
- Deploying a PowerFlex cluster using a CSV topology file
- Deploy a PowerFlex cluster using REST API commands
- Deploying a PowerFlex cluster using PowerFlex Manager templates and resource groups
- Deploying PowerFlex file nodes
- Post-installation activities
- Post-installation checklist
- Configuring NVMe initiators
- SDC deployment preparation tasks for SLES, Oracle Linux, and Ubuntu
- Enable OpenSSL FIPS compliance
- Check port usage
- Configure the SDC (scini) driver for SELinux
- Mount a PowerFlex volume
- Associate PowerFlex volumes with physical disks
- Configure the SDS for optimal memory usage
- Configure the SDS for NVDIMM health awareness
- Performance tuning post-installation
- PowerFlex system changes
- Optimize Linux
- Optimize VMware ESXi
- Optimize Windows
- Optimizing VM guests
- Optimize Hyper-V
- Optimize AIX
- Configure RAID controller virtual disk settings
- Apply performance profiles to system components
- Configure SDC access to the MDM
- Upgrade
- Upgrading to PowerFlex 4.5.x from PowerFlex 4.0.2 or 4.5
- Upgrading to PowerFlex 4.5.x from PowerFlex 3.6
- Preparing to upgrade
- Upgrade workflow
- Upgrade limitations
- Deploying into a VMware vSphere environment
- Management VM resource requirements
- Deploying the PowerFlex management platform
- Deploying and configuring the PowerFlex management platform installer VM
- Deploying and configuring the PowerFlex management platform VMs
- Deploy the PowerFlex management platform cluster
- Finalize firewall configuration
- Collect PowerFlex management platform support data
- Uninstall the PowerFlex management platform cluster
- Configuring PowerFlex Manager
- Post-upgrade activities
- Post-upgrade checklist
- Upgrade SDC on Windows-based server
- Upgrade SDC on Linux and AIX
- Upgrade SDC on VMware ESXi
- Configuring NVMe initiators
- Deploying a PowerFlex file node
- Upgrade PowerFlex file services
- Maintenance activities
- Maintenance activity for a PowerFlex controller node
- Other maintenance activities
- VMware ESXi upgrade prerequisites
- Upgrade the VMware ESXi and SDC versions on the PowerFlex node
- Post-upgrade steps
- Shutdown or restart a node gracefully
- Red Hat Enterprise Linux/CentOS upgrade to version 8.3 and later
- Upgrade hardware
- Run script on host
- Power off the co-resident system
- Power on co-resident system
Dell PowerFlex 4.5.x Install and Upgrade Guide
Post-upgrade activities
Perform the procedures listed in the post-upgrade checklist after system upgrade to get your PowerFlex storage up and running in an optimal manner.
See the post-upgrade checklist to determine the procedures that are relevant for your system. Some procedures are performed using PowerFlex Manager, and some are performed using command line. PowerFlex Manager activities are described in detail in the online help system.
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\