Dell PowerFlex Manager 4.6.x CLI Reference Guide

When a container is provided in the command (protection domain, fault set, all SDSs, all SDCs), the command configures all objects in the container. Objects that are added later will not be configured.

Syntax

scli --set_performance_parameters ([--sds_id <ID> | --sds_name <NAME> | --sds_ip <IP> [--sds_port <PORT>] | --protection_domain_id <ID> | --protection_domain_name <NAME> | --fault_set_id <ID> | ((--protection_domain_id <ID> | --protection_domain_name <NAME>) --fault_set_name <NAME>) | --all_sds] [--sdc_id <ID> | --sdc_name <NAME> | --sdc_guid <GUID> | --sdc_ip <IP> | --all_sdc] [(((--protection_domain_id <ID> | --protection_domain_name <NAME>) --storage_pool_name <NAME>) | --storage_pool_id <ID>)] [--peer_system_id <ID> | --peer_system_name <NAME> | --peer_system_ip <IP> [--peer_system_port <PORT>] | --peer_system_object_id <ID> | --all_peer_system] [--sdr_id <ID> | --sdr_name <NAME> | --sdr_ip <IP> [--sdr_port <PORT>] | --all_sdr] [--apply_to_mdm]) (--profile <PROFILE>)

Parameters

--sds_id <ID>

SDS ID

--sds_name <NAME>

SDS name

--sds_ip <IP>

SDS IP address

--sds_port <PORT>

Port associated with the SDS

--protection_domain_id <ID>

Protection domain ID

--protection_domain_name <NAME>

Protection domain name

--fault_set_id <ID>

Fault set ID

--fault_set_name <NAME>

Name of the new fault set

--all_sds

Set SDS-related parameters on all SDSs.

--sdc_id <ID>

SDC ID

--sdc_name <NAME>

SDC name

--sdc_guid <GUID>

SDC global unique identifier

--sdc_ip <IP>

SDC IP address

--all_sdc

Set SDS-related parameters on all SDCs.

--peer_system_id <ID>

Replication peer system ID

--peer_system_name <NAME>

Replication peer system name

--peer_system_ip <IP>

Replication peer system IP address

--peer_system_port <PORT>

Port assigned to the replication peer system

--peer_system_object_id <ID>

Replication peer system internal object ID

--all_peer_system

Set Replication peer system related parameters to all replication peer systems.

--sdr_id <ID>

SDR ID

--sdr_name <NAME>

SDR name

--sdr_ip <IP>

SDR IP address

--sdr_port <PORT>

SDR port

--all_sdr

Set SDR-related parameters on all SDRs.

--apply_to_mdm

Apply the performance profile to the MDM. This flag is only applicable when setting the profile.

--profile {compact | high_performance}

Set the performance profile as compact or high_performance. The high performance profile configures a predefined set of parameters for very high performance use cases.