Dell PowerFlex Manager 4.6.x CLI Reference Guide

Alerts thresholds are calculated from each storage pool capacity after deducting the defined amount of spare capacity. You can set thresholds for a single storage pool or for all storage pools.

Syntax

scli --set_capacity_alerts_threshold --capacity_high_threshold <PERCENT> --capacity_critical_threshold <PERCENT> (--all_storage_pools | --system_default | (((--protection_domain_id <ID> | --protection_domain_name <NAME>) --storage_pool_name <NAME>) |--storage_pool_id <ID>))

Parameters

--capacity_high_threshold <PERCENT>

Threshold of the non-spare capacity of the Storage Pool that will trigger a high-priority alert, expressed as a percentage. Setting a zero threshold for a storage pool resets it to use the global threshold.

--capacity_critical_threshold <PERCENT>

Threshold of the non-spare capacity of the storage pool that triggers a critical-priority alert, expressed as a percentage. Setting a zero threshold for a storage pool resets it to use the global threshold.

--protection_domain_id <ID>

Protection domain ID

--protection_domain_name <NAME>

Protection domain name

--storage_pool_name <NAME>

Storage pool name

--storage_pool_id <ID>

Storage pool ID

--all_storage_pools

Thresholds apply to all storage pools

--system_default

Thresholds apply to newly created storage pools