Dell PowerFlex Manager 4.6.x CLI Reference Guide

Possible scenarios for using this command are:

• In PowerFlex setups that include an SDS installed on a server with more than one NIC (network interface card), you might want to divert the usage of one of the NICs to a different purpose.
• An IP range may have changed. For example, an SDS may be using an IP address in a certain range, but the IP range has been changed to a different one in order to free up the previously used addresses.

Syntax

scli --remove_sds_ip (--sds_id <ID> | --sds_name <NAME> | --sds_ip <IP> [--sds_port <PORT>]) --sds_ip_to_remove <IP>

Parameters

--sds_id <ID>

SDS ID

--sds_name <NAME>

SDS name

--sds_ip <IP>

SDS IP address

--sds_port <PORT>

Port associated with the SDS

--sds_ip_to_remove <IP>

IP address to remove from the SDS