Dell PowerFlex Manager 4.6.x CLI Reference Guide

Query a replication peer-system for storage pools on which a volume of specified size and provisioning mode can be created. These storage pools can be used in destination volumes auto-provisioning.

Syntax

scli --query_replication_destination_storage_pool_candidates (--peer_system_id
<ID> | --peer_system_name <NAME> | --peer_system_ip <IP> [--peer_system_port <PORT>] | --peer_system_object_id <ID>) (--remote_protection_domain_id <ID> | --remote_protection_domain_name <NAME>) --size_gb <SIZE> [Provisioning options]

Parameters

--peer_system_id <ID>

Replication peer system ID

--peer_system_name <NAME>

Replication peer system name

--peer_system_ip <IP>

Replication peer system IP address

--peer_system_port <PORT>

Port assigned to the replication peer system

--peer_system_object_id <ID>

Replication peer system internal object ID

--remote_protection_domain_id <ID>

Remote protection domain ID

--remote_protection_domain_name <NAME>

Remote protection domain name

--size_gb <SIZE>

The required volume size. The query results show only storage pools on which a volume of this size can be created.

Select any one of the following provisoning options:

--thin_provisioned

Volume is thin-provisioned

--thick_provisioned

Volume is thick-provisioned

<BLANK>

Use storage pool default (thick for medium granularity, thin for fine granularity)