Dell PowerFlex Manager 4.6.x CLI Reference Guide

For a read to be stored in the RAM of a specific SDS, the read RAM cache feature on that SDS must be enabled, and the relevant storage pool and the relevant volume must both be configured to use read RAM cache. Caching only begins after one or more devices are added to the SDS.

Syntax

scli --enable_sds_rmcache ((--sds_id <ID> | --sds_name <NAME> | --sds_ip <IP> [--sds_port <PORT>]) | (--protection_domain_id <ID> | --protection_domain_name <NAME>)) 
  [--i_am_sure]

Parameters

--sds_id <ID>

SDS ID

--sds_name <NAME>

SDS name

--sds_ip <IP>

SDS IP address

--sds_port <PORT>

Port assigned to the SDS

--protection_domain_id <ID>

Protection domain ID

--protection_domain_name <NAME>

Protection domain name

--i_am_sure

Skip the safety questions for command execution. (For example: “This could damage the stored data. Are you sure?”)

scli --enable_sds_rmcache --sds_ip 10.100.5.25 --protection_domain_name pd01

scli --enable_sds_rmcache --sds_ip 10.100.5.25 --protection_domain pd25