Dell PowerFlex 4.5.x CLI Reference Guide

Notes

Journal capacity is defined as a percentage of the total storage capacity in the storage pool and must equal at least 28 GB per SDR. In general, journal capacity should be at least 5% of replicated usable capacity in the protection domain, including volumes used as source and targets. It is important to assign enough storage capacity for the replication journal.

Syntax

scli --set_replication_journal_capacity (((--protection_domain_id <ID> | --protection_domain_name <NAME>) --storage_pool_name <NAME>) | --storage_pool_id <ID>) --replication_journal_capacity_max_ratio <RATIO>)

Parameters

--protection_domain_id <ID>

Protection domain ID

--protection_domain_name <NAME>

Protection domain name

--storage_pool_name <NAME>

Storage pool name

--storage_pool_id <ID>

Storage pool ID

--replication_journal_capacity_max_ratio <RATIO>

Maximum capacity percentage to be allocated for journal capacity (from 0 to 100).