Dell PowerFlex 4.5.x CLI Reference Guide

Notes

Before running this SCLI command to modify port assigned to the replication peer system, you must first edit the /opt/emc/scaleio/mdm/cfg/conf.txt configuration file and set the mdm_external_port field to the new port. After you've saved the configuration file, restart the MDM service. Then run this command to modify the port assigned to the replication peer system.

Syntax

scli --modify_replication_peer_system_port (--peer_system_id <ID> | --peer_system_name <NAME> | --peer_system_ip <IP> [--peer_system_port <PORT>] | --peer_system_object_id <ID>) --new_peer_system_port <PORT>

Parameters

--peer_system_id <ID>

Replication peer system ID

--peer_system_name <NAME>

Replication peer system name

--peer_system_ip <IP>

IP address of the replication peer system

--peer_system_port <PORT>

Port assigned to the replication peer system

--peer_system_object_id <ID>

Replication peer system internal object ID

--new_peer_system_port <PORT>

New port assigned to the peer system. When this parameter is omitted, the default listening port is used.