Upgrade Dell PowerFlex to v3.6.x

Dell OpenManage DRAC Tools (RACADM)

An integrated Dell Remote Access Controller (iDRAC) with Lifecycle Controller is embedded in every VxFlex Ready Node server. The RACADM command-line utility provides a scriptable interface that enables you to configure the iDRAC either locally or remotely. The utility runs on the management station and the managed system.

The RACADM utility supports the following interfaces:

• Local - Supports running RACADM commands from the managed server's operating system. To run local RACADM commands, install the OpenManage software on the managed server. Only one instance of Local RACADM can be executed on a system at a time.
• SSH or Telnet (also known as Firmware RACADM) - Firmware RACADM is accessible by logging in to iDRAC using SSH or Telnet.
• Remote - Supports running RACADM commands from a remote management station such as a laptop or desktop running Linux. To run Remote RACADM commands, install the DRAC Tools utility from the OpenManage software on the remote computer.