NOTE: Specify a directory outside the
PowerFlex Gateway installation directory for the newly created keystore file. This will prevent it from being overwritten when the
PowerFlex Gateway is upgraded or reinstalled.
If you already have a Certificate Signing Request (CSR), skip this step.
If you need a CSR, generate one by typing the following command. (If you did not define a keystore password in the previous step, omit the password flags.)
If you already have an SSL certificate, skip this step.
If you need an SSL certificate, use your CSR to obtain a new certificate from a third-party trusted SSL certificate provider. Save the certificate file on your server, outside the
PowerFlex Gateway installation directory.
Import the Trusted Root, by typing this command. (If you did not define a keystore password, omit the password flags.)
You must provide a unique alias name for every intermediate certificate that you upload with this step.
Install the SSL Certificate under the same alias that the CSR was created from (<YOUR_ALIAS> in previous steps), by typing the command (if you did not define a keystore password, omit the password flags):