Disable IPMI on a R640/R740xd/R840 server
Use the following procedure to disable IPMI on
PowerFlex R640/R740xd/R840 nodes.
About this task
You can run this procedure at any time post-deployment.
Prerequisites
Ensure that:
- You have network connectivity to the server.
- You know the IP address of the iDRAC port.
- You know the password for accessing iDRAC as root). If necessary, the customer can give you the credentials.
Steps
-
Open a new browser session and log in to iDRAC.
-
On the main menu, click
.
-
In the
Connectivity tab, select
.
The IPMI configuration settings appear.
-
Change the
Enable IPMI Over LAN option to
Disabled, and then click
Apply.
-
In the
Success message, click
OK.
-
Log out of iDRAC.
-
Repeat the above steps on every R640/R740xd/R840 node in the system.