Dell PowerFlex 4.6.x Install and Upgrade Guide

Verify DNS on a Linux-based PowerFlex node

Use the procedure to verify DNS on a Linux-based PowerFlex node.

1. SSH to the Linux-based PowerFlex node.
2. Type the following: nslookup <FQDN>.
   Example output:

   pfmp-mvm-01:~ nslookup pfmp-mvm-01.example.com
   Server:         10.10.105.240
   Address:        10.10.105.240:53
   
   Name:   pfmp-mvm-01.example.com
   Address: 10.10.105.30
   
   pfmp-mvm-01:~

3. Type the following: nslookup <IP address>.
   Example output:

   pfmp-mvm-01:~ nslookup 10.10.105.30
   Server:         10.10.105.240
   Address:        10.10.105.240:53
   
   123.123.123.45.in-addr.arpa      name = pfmp-mvm-01.example.com
   
   pfmp-mvm-01:~