Configure the
PowerFlex management platform networking interfaces
Use the following procedure to configure the networking files for the
PowerFlex management platform cluster VMs.
Prerequisites
Ensure the following:
In a multi-VLAN or multi-subnet configuration, the controller management must be configured to use PowerFlex management controller management (PFMC-MGMT) (VLAN 130).
In standard builds without a multi-VLAN or multi-subnet configuration, the controller management can be either VMware ESXi management (VLAN 105) or PowerFlex management controller management (PFMC-MGMT) (VLAN 130).
NOTE:Based on your requirement, configure only the required interfaces on the management VMs. If you have unused interfaces on the deployed management VMs, then ensure you disconnect those interfaces within the vCenter, for example, an out-of-band interface. If the unused interfaces are connected and unconfigured, then
PowerFlex Manager may display unexpected errors.
Steps
Launch the web console from the Virtual Machine Manager, log in as
delladmin.
Configure the
flex-node-mgmt-<vlanid> eth0 interface: