Dell PowerFlex 4.6.x Install and Upgrade Guide

Add a host to PowerFlex

Use this procedure to add a host to PowerFlex using PowerFlex Manager.

1. Log in to PowerFlex Manager.
2. Click Block > Hosts.
3. Click +Add Host.
4. Enter the hostname and paste the host NQN from the copy buffer.
5. Enter the Number of Paths per volume. The default number of paths are four per volume, and maximum number of paths are eight per volume.
6. Enter the Number of System Ports per protection domain. The default number of system ports are 10 per protection domain, and maximum number of system ports are 16 per protection domain.
7. Click Add.