Dell PowerFlex 4.6.x Install and Upgrade Guide

Retrieve volume information for Windows

You can retrieve volume information from the MDM.

The sg_inq.exe file was added to the MSI installation and can be found at C:\Program Files\EMC\ScaleIO\SDC\diag\.

Run the sg_inq HardiskX SCSI query command.
The result of this command includes the EMC volume ID at the bottom of the output.
On the MDM, get the PowerFlex volume information:
```
C:\Program Files\emc\scaleio\sdc\bin\drv_cfg --query_vol
```
Output similar to the following is displayed:
From the Windows command prompt, run this command:
```
wmic diskdrive get deviceid,serialnumber | findstr "EMC"
```
Output similar to the following is displayed:
\\.\PHYSICALDRIVE13 EMC-0b246c9a755ca3dd-6acb988500000004
The first part of the output is the disk name. In our example: PHYSICALDRIVE13
The second part is the disk serial number. The last set of the second part (after the dash) is the PowerFlex volume ID. In our example: 6acb988500000004