Four data networks: two frontend and two backend, with fault sets
This example shows a CSV topology file for four data networks, where two are frontend networks, and two are backend networks. Fault sets are also configured.
Four data networks are configured as follows:
Two frontend networks for SDCs
Two backend networks for MDMs, SDSs, and SDRs (when replication is required)
Two external networks for replication (when applicable)
Fault sets
An example CSV file, saved in Excel format for convenience, can be downloaded if you are viewing this page online in the Dell Technologies Technical Resource Center:
BE-FE-6_node_FaultSet.xlsx
The following table lists the parameters that must be configured for this use case. Other optional parameters in the CSV file should be configured as necessary.