Dell PowerFlex v3.6.x CLI Reference Guide

Syntax

scli --set_storage_pool_external_acceleration_type ((((--protection_domain_id <ID> | --protection_domain_name <NAME>) --storage_pool_name <NAME>) |--storage_pool_id <ID>) --external_acceleration <TYPE>
  [--override_sds_device_specific_external_acceleration | --keep_sds_device_specific_external_acceleration]

Parameters

--protection_domain_id <ID>

Protection Domain ID

--protection_domain_name <NAME>

Protection Domain name

--storage_pool_name <NAME>

Storage Pool name

--storage_pool_id <ID>

Storage Pool ID

--external_acceleration <TYPE>

External acceleration for the device, where TYPE is one of the following:

none

All devices are not accelerated by a non-PowerFlex read or write cache.

read

All devices are accelerated by a non-PowerFlex read cache.

write

All devices are accelerated by a non-PowerFlex write cache.

read_and_write

All devices are accelerated by both non-PowerFlex read and write cache.

--override_sds_device_specific_external_acceleration

Override SDS device-specific external acceleration.

NOTE:The device's external acceleration type will be overridden according to the external acceleration type set for the --external_acceleration parameter. If there is a mismatch between the Storage Pool's external acceleration type and the device's external acceleration type, the command will fail with informative error message.

--keep_sds_device_specific_external_acceleration

Keep SDS device-specific external acceleration.